krnel boot file is /boot/kernel/kernel
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Thu Sep 13 08:46:49 JST 2007
takachan@pato.running-dog.net:/usr/src/sys/amd64/compile/Pato_6STABLE_AMD64_SMP_Kernel
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2099.94-MHz K8-class CPU)
Origin = "AuthenticAMD"  Id = 0x60fb1  Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,<b8>>
Cores per package: 2
real memory  = 2146304000 (2046 MB)
avail memory = 2063093760 (1967 MB)
ACPI APIC Table: <ATI    ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
acpi0: <ATI ASUSACPI> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff00009eeb40 StartNode 0xffffff00009eeb40 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff00009ee9c0 StartNode 0xffffff00009ee9c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff00009ee840 StartNode 0xffffff00009ee840 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKB] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000a52ac0 StartNode 0xffffff0000a52ac0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000a52940 StartNode 0xffffff0000a52940 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000a527c0 StartNode 0xffffff0000a527c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000a52640 StartNode 0xffffff0000a52640 ReturnNode 0
acpi0: Power Button (fixed)
acpi0: reservation of fed00000, 100 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdbff000-0xfdbfffff irq 19 at device 0.0 on pci2
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1b:fc:87:da:6e
re0: [FAST]
atapci0: <GENERIC ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfe020000-0xfe023fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
fxp0: <Intel 82559 Pro/100 Ethernet> mem 0xfde00000-0xfdefffff irq 21 at device 6.0 on pci3
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0xfffd
fxp0: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9
fxp0: MII without any PHY!
device_attach: fxp0 attach returned 6
fwohci0: <VIA Fire II (VT6306)> port 0xcf00-0xcf7f mem 0xfdfff000-0xfdfff7ff at device 7.0 on pci3
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:3d:fd:c0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
cpu0: Px state: P0, 2100MHz, 65000mW, 100us, 9us
cpu0: Px state: P1, 2000MHz, 59546mW, 100us, 9us
cpu0: Px state: P2, 1800MHz, 49471mW, 100us, 9us
cpu0: Px state: P3, 1000MHz, 22161mW, 100us, 9us
cpu0: Px method: AMD K8 Cool'n'Quiet
acd0: DVDR <HL-DT-ST DVDRAM GSA-4167B/DL10> at ata0-master UDMA33
ad0: 239372MB <Maxtor 6L250S0 BANC1G10> at ata2-master UDMA33
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20070710_0047>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a